Yeessss.... Worked with my Dish DVR 510 receiver
Programming was a pain but it works. I wish all the tabs were included (see that green tab? google the remote - they refer to whether it is a IR or UHF or IR/UHF remote - I would have been better off with a IR/UHF this is an IR, green tab #1).
Under "system info" (menu button) you can find your remote "code", which is what you program the Sat button with. There is a way to reset it if you have absolutely no remote by resetting the DVR and turning it back on. This was hard for me to figure out (fyi, ours was "9"). Once you know what your code is, hold the SAT button down until all the buttons blink, enter the code, and press pound. Easy peezy.
2008-10-30
